What is the WR3612 white shaker cabinet?

The WR3612 is a 36-inch wide by 12-inch high, 24-inch deep over-refrigerator wall cabinet in the Faircrest White Shaker line. It mounts above a standard refrigerator to close the gap to the ceiling and add storage, with two full-overlay shaker doors and no shelves (open interior). At 24 inches deep it matches the depth of the fridge below. Built with a half-inch solid plywood box, a solid maple/birch face frame, and soft-close hardware — no particle board.

How deep is the WR3612?

The WR3612 is 24 inches deep — deeper than a standard 12-inch wall cabinet — so it lines up with the front of the refrigerator for a built-in look and holds larger items.

How do I install the WR3612 for the best look?

Install it between a pair of REP9624 refrigerator end panels, or beside a tall pantry cabinet — or a combination of the two — so the refrigerator sits in a finished, built-in niche. The panels box in the sides of the fridge and give the whole run a custom appearance.

Does the WR3612 have a glass door option?

No. There are no glass door options available for the refrigerator wall cabinets in this size.

Is the WR3612 solid wood or particle board?

The WR3612 box is half-inch solid plywood and the face frame is solid maple/birch — no particle board. The doors are HDF with a solid wood shaker profile on soft-close 6-way adjustable hinges.

How long does the WR3612 take to assemble?

Most wall cabinets take 15–30 minutes to assemble using a drill, a rubber mallet, and clamps. A step-by-step assembly video is provided on the product page — the only difference for this cabinet is that it is wider with two doors and 24 inches deep (to sit over the fridge) instead of the standard 12 inches; it is otherwise assembled the same way.

What is the return policy?

Returns are accepted within 30 days of delivery on unassembled cabinets in original packaging. Unwanted returns are subject to return shipping and a 25% restocking fee. Damaged or defective items are handled on a priority basis.

1 7

Faircrest Cabinets

WR3612 - 36" Wide 12" High, Refrigerator Wall Cabinet - White Shaker

$204.31 USD

~~$358.13 USD~~ $204.31 USD

Save Now Sold out

Shipping calculated at checkout.

Options WS-WR3612-RTA (Ready to Assemble) WS-WR3612-(A) (Factory Assembled)

Product variants

Quantity

Solid Plywood — No Particle Board

Over-Fridge Depth — 24"

Order Processing: Up to 14 Business Days

Trade Pricing Available

The WR3612 is a 36"-wide × 12"-high over-refrigerator wall cabinet — built 24" deep to match the refrigerator below and close the gap to the ceiling with usable storage. Two full-overlay shaker doors, no shelves (open interior). Solid plywood box, soft-close hinges. No particle board. Available ready-to-assemble (RTA) or factory pre-built.

For the best look, install it between a pair of REP9624 refrigerator panels, or beside a tall cabinet. At $204.31 RTA vs. the $358.13 MSRP — about 43% off — it's trade-quality construction at a price that keeps your remodel on budget.

💡 Over-Fridge Cabinet — Build It In. The WR3612 is designed to sit above the refrigerator. For a finished, built-in look, install it between two REP9624 refrigerator end panels, or next to a tall pantry cabinet — or a combination of the two — so the fridge sits in its own niche. Two doors, no shelves (open interior); door bumpers included. No glass door option in this size.

WR3612 Dimensions

Width

36"

Depth

24"

Height

12"

Construction Specs — White Shaker WR3612

Box Construction½" Solid Plywood

Face FrameSolid Wood

Wood SpeciesSolid Maple / Birch

Door StyleShaker / HDF (2 doors)

ShelvesNone — open interior

Depth24" (over-fridge)

HingeSoft-Close 6-Way Adj.

Glass OptionNot available

Choose Your Option — RTA or Factory Assembled

Option	What's Included	MSRP	Our Price
RTA WS-WR3612-RTA	Flat-packed, ready to assemble	$358.13	$204.31	Best Value
Factory Assembled WS-WR3612-(A)	Pre-built cabinet, ready to hang	$429.76	$227.27

Flat-packed shipping dimensions: 5" × 38" × 26" — approximately 38 lbs. RTA ships flat-packed to reduce cost and damage risk. Contact us — we can often arrange lower rates, especially for multi-cabinet orders or warehouse pickups.

Watch a step-by-step walkthrough of assembling your RTA wall cabinet. Most wall cabinets assemble in 15–30 minutes with standard tools.

Note: This is our standard wall cabinet assembly video. The only difference for the WR3612 is that it's a wide, two-door cabinet and it's 24" deep (to sit over the refrigerator) instead of the standard 12" — it's assembled the same way.

Measurement	Value
Exterior Width	36"
Exterior Depth	24" (over-fridge — vs standard 12")
Exterior Height	12"
Doors	Two full-overlay shaker doors
Adjustable Shelves	None (open interior)
Glass Door Option	Not available
Best Paired With	REP9624 refrigerator panels / tall cabinets
Flat-packed Dimensions	5" × 38" × 26"
Shipping Weight (RTA)	38 lbs

All measurements are nominal. Allow ±⅛" tolerance. A 24"-deep cabinet projects further from the wall than a standard wall cabinet — confirm clearances above the refrigerator before ordering.

Box: ½" solid plywood — no particle board. Holds screws well for secure wall mounting of a deep cabinet.
Depth: 24" — matches the refrigerator below, twice the depth of a standard 12" wall cabinet.
Doors: Two full-overlay shaker doors (HDF with solid wood shaker profile).
Shelves: No shelves (open interior).
Hinge: European-style soft-close concealed hinges, 6-way adjustable.
Best paired with: REP9624 refrigerator end panels on each side, or a tall cabinet, to frame the fridge into a built-in niche.
Interior: Color-matched box. Door bumpers included. No glass door option.

RTA (Ready to Assemble) is the best value and ships flat-packed, reducing freight cost and damage risk. Assembly takes 15–30 minutes with standard tools. RTA orders are processed in up to 14 business days — though most are ready within 3–8 business days.

Factory Assembled units arrive pre-built and ready to hang. Assembled cabinets are bulkier to ship, so freight can be higher. Factory assembled orders are processed in up to 21 business days — typically 10–15 business days on average. Contact us — we can often reduce freight costs, especially on larger orders.

RTA orders are typically processed within 3–8 business days (up to 14 business days).
Factory assembled orders are typically processed in 10–15 business days (up to 21 business days).
RTA cabinets ship in flat-pack cartons — significantly lower freight risk than assembled units.
Shipping transit time after processing varies depending on distance from our warehouse locations in Ohio and Florida.
Warehouse collection is always free. Collections are by appointment only, Monday–Friday, 8:00 AM–3:30 PM, excluding public holidays. Contact us to book a pickup time.
Inspect your delivery for damage before signing. Note any damage on the delivery receipt and contact us immediately.

Contractor, flipper, or designer? We offer trade pricing, volume discounts, and dedicated support for professionals. Contact us to set up a trade account →

An over-fridge cabinet looks best framed on both sides so the refrigerator sits in a built-in niche. Most orders for this cabinet include:

REP9624 Refrigerator End Panel — the 96" × 24"-deep panel that flanks the refrigerator. Install this cabinet between a pair of REP9624 panels (or beside a tall pantry cabinet, or a combination of the two) to box in the fridge and give the run a finished, built-in look. Trimmable on installation.
LCM8 Crown Molding — caps the top of the cabinet and the flanking panels for a finished, custom look. Sold in 8′ lengths.
LRM8 Light Rail Molding — trims the bottom edge of the run. Sold in 8′ lengths.
WF342 (3") or WF642 (6") Wall Fillers — close gaps between the cabinet, panels, and walls. Both can be trimmed on installation.
TUK Touch-Up Kit — recommended with every cabinet order. Covers any nicks or scratches picked up during assembly or installation, and normal wear-and-tear over the cabinet's lifetime.