1 10

Faircrest Cabinets

WBC2736 - 27" Wide 36" High, Blind Corner Wall Cabinet - White Shaker

WBC2736 - 27" Wide 36" High, Blind Corner Wall Cabinet - White Shaker

$286.07 USD
$501.44 USD $286.07 USD
Save Now Sold out
Shipping calculated at checkout.
Options
Solid Plywood — No Particle Board
Turns the Corner into Storage
Order Processing: Up to 14 Business Days
Trade Pricing Available

The WBC2736 is a 27"-wide × 36"-high blind corner wall cabinet — the piece that turns the dead corner where two runs of upper cabinets meet into usable storage. It has one functional door beside a 6" center stile, with a blind section that tucks neatly behind the adjoining wall cabinet. Solid plywood box, soft-close hinges. No particle board. Available ready-to-assemble (RTA) or factory pre-built.

Two adjustable shelves behind the door. At $286.07 RTA vs. the $501.44 MSRP — about 43% off — it's trade-quality construction at a price that keeps your remodel on budget.

💡 Blind Corner — One Functional Door. The WBC2736 has a single working door (approx. 13⅝" wide, over an ~11" face-frame opening) next to a 6" center stile. The blind section — an ~6¾" face-frame opening — runs behind the cabinet on the adjoining wall. There is no manufacturer requirement to pull the cabinet from the corner, but it can be pulled up to about 3½" if needed.
🔧 Installation tip — use a 3" filler. Add a 3"-wide wall filler (WF342) where the perpendicular wall cabinet meets this one. The filler creates clearance so door hardware can't collide.

WBC2736 Dimensions

WBC2736 — 27" wide × 12" deep × 36" high door ~13⅝" 6" stile blind 27" 36"
Width
27"
Depth
12"
Height
36"

Construction Specs — White Shaker WBC2736

Box Construction½" Solid Plywood
Face FrameSolid Wood
Wood SpeciesSolid Maple / Birch
Door StyleShaker / HDF (1 door)
Door WidthApprox. 13⅝"
Center Stile6" wide
Shelves2× ¾" Adjustable
HingeSoft-Close 6-Way Adj.

Choose Your Option — RTA or Factory Assembled

Option What's Included MSRP Our Price
RTA
WS-WBC2736-RTA 		Flat-packed, field-configurable blind left or right $501.44 $286.07 Best Value
Factory Assembled
WS-WBC2736L / WBC2736R -(A) 		Pre-built — choose blind-left (door right) or blind-right (door left) $601.73 $318.21
Ships from our Ohio & Florida warehouses. RTA ships flat-packed to reduce cost and damage risk. Contact us — we can often arrange lower rates, especially for multi-cabinet orders or warehouse pickups.

Watch a step-by-step walkthrough of assembling your RTA wall cabinet. Most wall cabinets assemble in 15–30 minutes with standard tools.

Note: This is our standard wall cabinet assembly video. The only difference for the WBC2736 is that it has one functional door — it's assembled the same way.

What's in the box

2
Side panels
3
Top / bottom panels
1
Back panel
1
Front face
2–3
Shelves
4
Corner braces

Step-by-step assembly

1
Position the front face
Lay the front face flat on a soft surface — a blanket or folded cardboard — with the dovetail grooves facing upward. These grooves accept the top, bottom, and side panels.
💡 Protect finished surfaces: lay the face on a blanket so the paint doesn't scratch.
grooves up ↑
2
Attach the side, top, and bottom panels
Slide each side panel into its dovetail groove on the front face. Repeat for the top and bottom panels. Press firmly until each dovetail is fully seated — you'll feel it stop.
💡 Do one panel at a time and check alignment before moving to the next.
slide in → click
3
Slide in the back panel
Insert the back panel into the grooves along the inside edges of both side panels. Push evenly until the panel sits completely flush — no gap or overhang.
push until flush
4
Secure the 4 corner braces
Place one metal corner brace in each of the 4 top interior corners. Fasten each to its two panels with the included screws. Snug is enough — don't overtighten.
💡 Start all 4 screws loosely, confirm the cabinet is square, then tighten fully.
× 4corners
5
Install the shelves
Choose your shelf height and push the shelf clips into the matching pre-drilled holes on both side panels. Slide the shelf in with its finished edge facing outward.
💡 Stand the cabinet upright to test shelf height before mounting on the wall.
finished edge out

Measurement Value
Exterior Width 27"
Exterior Height 36"
Exterior Depth 12"
Functional Doors One
Door Width Approx. 13⅝"
Door Face-Frame Opening Approx. 11"
Center Stile Width 6"
Blind-Section Opening Approx. 6¾"
Maximum Pull from Corner Approx. 3½" (no manufacturer requirement)
Adjustable Shelves 2× ¾"
Glass Door Option Not available

All measurements are nominal. Allow ±⅛" tolerance. Add a 3" wall filler (WF342) where the perpendicular wall cabinet meets this cabinet to keep door hardware from colliding.

  • Box: ½" solid plywood — no particle board. Holds screws well for secure wall mounting.
  • Face Frame: Solid wood with a 6" center stile between the door and the blind section.
  • Door: One functional full-overlay shaker door (HDF), approx. 13⅝" wide over an ~11" opening.
  • Blind section: ~6¾" face-frame opening. Can be pulled up to ~3½" from corner if needed.
  • Hinge: European-style soft-close concealed hinges, 6-way adjustable.
  • Shelves: Two adjustable shelves — repositionable.
  • Filler: 3" wall filler (WF342) recommended at the perpendicular cabinet.

RTA (Ready to Assemble) is the best value and ships flat-packed, reducing freight cost and damage risk. The blind side is field-configurable for either corner orientation. Assembly takes 15–30 minutes. Processed in up to 14 business days — most ship within 3–8 business days.

Factory Assembled units arrive pre-built — choose blind-left (door on the right) or blind-right (door on the left). Processed in up to 21 business days (typically 10–15). Contact us about freight rates on larger orders.

  • RTA orders: typically 3–8 business days processing (up to 14).
  • Factory assembled: typically 10–15 business days (up to 21).
  • RTA cabinets ship in flat-pack cartons — lower freight risk than assembled units.
  • Transit time varies by distance from our Ohio and Florida warehouses.
  • Warehouse collection is always free. By appointment only, Mon–Fri 8:00 AM–3:30 PM. Contact us to book.
  • Inspect delivery for damage before signing. Note any damage on the receipt and contact us immediately.
Contractor, flipper, or designer? We offer trade pricing, volume discounts, and dedicated support for professionals. Contact us to set up a trade account →

Wall cabinets are usually finished with molding at the top and bottom, plus fillers to close gaps. Most orders for this cabinet include:

  • LCM8 Crown Molding — caps the top of the wall cabinets against the ceiling or as a decorative top edge. Sold in 8′ lengths.
  • LVC Large Cove Crown Molding — a larger cove-profile crown for a more substantial top treatment, especially on 42" cabinets that run to the ceiling. Sold in 8′ lengths.
  • LRM8 Light Rail Molding — mounts under the wall cabinets to finish the bottom edge and conceal under-cabinet lighting. Sold in 8′ lengths.
  • WF342 (3") or WF642 (6") Wall Fillers — close gaps between wall cabinets, or between a cabinet and the wall. Both can be trimmed on installation.
  • TUK Touch-Up Kit — recommended with every cabinet order. Covers any nicks or scratches picked up during assembly or installation, and normal wear-and-tear over the cabinet’s lifetime.
View full details