What is the V3021 white shaker cabinet?

The V3021 is a 30-inch wide vanity sink base cabinet in the Faircrest White Shaker line — 21 inches deep and 34.5 inches tall. It has a decorative false drawer front across the top over two doors, with the interior left open to accommodate a sink bowl and plumbing. Built with a half-inch solid plywood box, a solid maple/birch face frame, and soft-close hardware — no particle board.

Does the V3021 have working drawers?

No. The drawer front on the V3021 is a decorative false front, standard on vanity sink bases — the sink bowl and plumbing occupy the space where a working drawer would otherwise go. It keeps the face-frame look consistent across the vanity run.

How deep is the V3021?

The V3021 is 21 inches deep — the standard depth for a bathroom vanity, shallower than a 24-inch kitchen base cabinet.

Does the V3021 have shelves or roll-out trays?

No. The interior is left fully open — no shelves and no working drawers — to accommodate the sink bowl and plumbing. Roll-out trays are not available for this cabinet.

Is the V3021 solid wood or particle board?

The V3021 box is half-inch solid plywood and the face frame is solid maple/birch — no particle board. The doors and false drawer front are HDF with a solid wood shaker profile, the industry standard for painted shaker doors.

How long does the V3021 take to assemble?

Most vanity bases take 15–30 minutes to assemble using a drill, a rubber mallet, and clamps. A step-by-step assembly video is provided on the product page — the only difference is that this cabinet is 21 inches deep instead of the 24-inch cabinet shown in the video, and it has a false drawer front rather than working drawers; the steps are otherwise the same.

What is the return policy?

Returns are accepted within 30 days of delivery on unassembled cabinets in original packaging. Unwanted returns are subject to return shipping and a 25% restocking fee. Damaged or defective items are handled on a priority basis.

1 7

Faircrest Cabinets

V3021 - 30" Wide Vanity Base Cabinet - White Shaker

$290.57 USD

~~$509.33 USD~~ $290.57 USD

Save Now Sold out

Shipping calculated at checkout.

Options WS-V3021-RTA (Ready to Assemble) WS-V3021-(A) (Factory Assembled)

Product variants

Quantity

Solid Plywood — No Particle Board

Vanity Depth — 21"

Order Processing: Up to 14 Business Days

Trade Pricing Available

The V3021 is a 30"-wide vanity sink base cabinet — 21" deep and 34.5" tall — built to the standard contractors and designers rely on: solid plywood box, soft-close hinges. No particle board. A decorative false drawer front runs across the top, with the interior left open for a sink bowl and plumbing. Available ready-to-assemble (RTA) or factory pre-built.

Two full-overlay doors. At $290.57 RTA vs. the $509.33 MSRP — about 43% off — it's trade-quality construction at a price that keeps your bathroom remodel on budget.

💡 Vanity Sink Base — False Drawer Front. The V3021 has a decorative false drawer front across the top (non-functional) over two full-overlay doors. There are no working drawers and no shelves — the interior is left open to clear the sink bowl and plumbing. Roll-out trays are not available for this cabinet. Door bumpers included.

V3021 Dimensions

Width

30"

Depth

21"

Height

34.5"

Construction Specs — White Shaker V3021

Box Construction½" Solid Plywood

Face FrameSolid Wood

Wood SpeciesSolid Maple / Birch

Door StyleShaker / HDF (double door)

Drawer FrontFalse (decorative)

InteriorOpen — for sink

HingeSoft-Close 6-Way Adj.

Depth21" (vanity)

Choose Your Option — RTA or Factory Assembled

Option	What's Included	MSRP	Our Price
RTA WS-V3021-RTA	Flat-packed, ready to assemble	$509.33	$290.57	Best Value
Factory Assembled WS-V3021-(A)	Pre-built cabinet, ready to install	$611.20	$323.22

Flat-packed shipping dimensions: 4.5" × 38" × 32" — approximately 71 lbs.
Factory assembled units may incur higher freight costs. Contact us — we can often arrange lower rates, especially for multi-cabinet orders or warehouse pickups.

Watch a step-by-step walkthrough of assembling your RTA vanity base cabinet. Most cabinets assemble in 15–30 minutes with standard tools.

Note: The only differences from the video are that the V3021 is 21" deep (instead of the 24"-deep cabinet shown) and it has a false drawer front — these are vanity sink base cabinets with no functioning drawers. It's assembled the same way.

Measurement	Value
Exterior Width	30"
Exterior Depth	21" (vanity depth)
Exterior Height	34.5"
Doors	Two full-overlay doors
Drawer Front	False (decorative, non-functional)
Interior	Open — no shelves, no drawers (for sink)
Roll-Out Trays	Not available for this cabinet
Flat-packed Dimensions	4.5" × 38" × 32"
Shipping Weight (RTA)	71 lbs
Door Overlay	Full

All measurements are nominal. Allow ±⅛" tolerance. Confirm sink and plumbing clearances before ordering.

Box: ½" solid plywood — no particle board. Holds screws better and resists swelling or delamination — important in the moisture environment of a sink cabinet.
Face Frame: Solid wood, not MDF. Stays rigid and accepts paint well.
Doors: Two full-overlay doors — HDF construction with a solid wood shaker profile, full overlay.
False drawer front: Decorative panel across the top. Does not open — standard on vanity sink bases, where the sink and plumbing occupy the space a working drawer would use.
Hinge: European-style soft-close concealed hinges, 6-way adjustable.
Interior: Fully open — no shelves, no drawers — to clear the sink bowl and plumbing. Color-matched box. Door bumpers included.
Roll-out trays: Not available for this cabinet.

RTA (Ready to Assemble) is the best value and ships flat-packed, reducing freight cost and damage risk. Assembly takes 15–30 minutes with standard tools. RTA orders are processed in up to 14 business days — though most are ready within 3–8 business days.

Factory Assembled units arrive pre-built and ready to install. Assembled cabinets are bulkier to ship, so freight can be higher. Factory assembled orders are processed in up to 21 business days — typically 10–15 business days on average. Contact us — we can often reduce freight costs, especially on larger orders.

RTA orders are typically processed within 3–8 business days (up to 14 business days).
Factory assembled orders are typically processed in 10–15 business days (up to 21 business days).
RTA cabinets ship in flat-pack cartons — significantly lower freight risk than assembled units.
Shipping transit time after processing varies depending on distance from our warehouse locations in Ohio and Florida.
Warehouse collection is always free. Collections are by appointment only, Monday–Friday, 8:00 AM–3:30 PM, excluding public holidays. Contact us to book a pickup time.
Factory assembled cabinets may incur higher shipping costs due to volume. Contact us — we can often reduce freight costs on larger orders.
Inspect your delivery for damage before signing. Note any damage on the delivery receipt and contact us immediately.

Contractor, flipper, or designer? We offer trade pricing, volume discounts, and dedicated support for professionals. Contact us to set up a trade account →

Vanity cabinets are usually completed with a few finishing pieces. Most orders for this cabinet include:

TK8 Toe Kick — sold in 8′ strips. Installed over the structural toe kicks to cover seams and make the toe kick area one continuous surface across the vanity run.
BF3 (3") or BF6 (6") Base Fillers — close gaps between cabinets, or between cabinets and walls. Both can be trimmed in height and/or width on installation.
TUK Touch-Up Kit — recommended with every cabinet order. Covers any nicks or scratches picked up during assembly or installation, and normal wear-and-tear over the cabinet's lifetime.

Installing on an island or open run? If the back of this cabinet will be exposed, finish it with:

SPW Skin Panel — a 36" × 96" panel that covers exposed cabinet backs. It can be trimmed on installation, depending on the needs of the remodel.
OCS8 Outside Corner Molding — covers the raw corner where the back panel meets the cabinet box for a clean, finished end.

End of a run with an exposed side?

MVEPBH Matching Vanity End Panel — a decorative panel for exposed vanity sides at the end of a run. Dresses the exposed side to match the cabinet faces for an elevated, premium finish.